When it
comes to sniper scopes, there are none better than Leatherwood ART Camputer
sniper Ssopes. As an Authorized Leatherwood/Hi-Lux Optics Dealer, Netstar
Technologies offers the complete line of Leatherwood/Hi-Lux Optics precision
scopes and mounting systems. Leatherwood Camputer ART sniper scopes were
developed during the Vietnam war as the M-16 became the main battle rifle
of the U.S. Forces.Now you can own the same advanced sniper scope technology
that made U.S. military snipers in South Vietnam feared by enemy soldiers
from the North.
Developed
by Jim Leatherwood, ART (Automatic Ranging & Trajectory) scopes make
it easier for the military to train qualified long-range snipers by practically
eliminating the need to estimate range. Thanks to a simple to read “through
the lens” ranging system and a fully adjustable external Camputer cam system,
soldiers are able to precisely place shots at ranges far beyond the practical
limits of open sights or conventional telescopic sights — without having
to guess the range or calculate bullet drop. Over the years, the Leatherwood/
Hi-Lux Camputer scope system has been steadily improved, and is currently
in use by military and law enforcement snipers.
ART
M-1000 2.5-10x 44mm Camputer Tactical Sniper Scope
The all-new
generation Leatherwood M-1000 is an extremely advanced sighting system;
the basics of which have now been in constant military use for more than
40 years. All the shooter has to do is to place the reticle on the target,
zoom in to “FRAME” an area of known size, aim, and squeeze the trigger
to “shoot”. It all takes less than 5 seconds, and the shooter's eye never
leaves the scope! When the shooter frames an 18” or 1 meter target using
the brackets on the reticle, the scope will automatically range the target
and compensate for bullet trajectory for distances of 250 to 1,000 meters.
This means no “holdover” or guesswork.
The
cam of the new generation 2.5-10x44mm ART (Auto Ranging Trajectory) system,
which was invented and designed by Jim Leatherwood for military snipers
in Vietnam during the 1960s, has been redesigned. New, interchangeable
modular cams make it simpler than ever to precisely calibrate this system
for just about any center-fire rifle cartridge -from .223 to .50 BMG. The
shooter can switch cams in a minute or less. Also, the new design permits
the cam…calibration ring…and range ring to be used or set independently
and more precisely. Easy access locking screws make changes quick and easy.
Other
features, which make this the greatest ART model ever, include:
-
Multi-Dial
rings that permit this scope to be pre-programmed for up to 4 different
zeros or multiple guns.
-
New cam
roller that permits easier operation of the ART system. (Interchangeable
size rollers for more precise calibration of scope)
-
New mount
with built in windage adjustment.
-
Quick
focus eyepiece that allows easy multi-shooter use.
-
A No-Math
Mil Dot reticle for easier ranging. You can turn this reticle to a true
Mil Dot Reticle at 10 X.
The Leatherwood ART M-1000 Camputer
sniper scope includes both scope rings, an integral clamp-on flat-top mounting
system and flip-up recticle covers.
Technical Information
Objective
Bell Diameter: 52 mm
Ocular
Bell Diameter: 42 mm
Adjustment
Click Value: 1/4 Minute of angle
Eye
Relief: 3 "
Exit
Pupil Diameter:
Field
of View at 100 Yards:
Dimensions,
in inches unless otherwise stated:
Weight:
25.2 oz
Warranty
Information: Limited Lifetime
Notes:
Waterproof, fogproof, shockproof
ART
M-1200 6-24X50mm Camputer Tactical Sniper Scope
M-1200
The Leatherwood ART scope
is virtually legendary and is still after nearly 40 years the only scope
that automatically computes the bullet trajectory as the target is ranged,
so the shooter only has to aim “dead-on” the target. Designed to extend
the range to the limit of the killing power of cartridges like the .338,
7.62 NATO and 50 BMG long range bullets, the Leatherwood M-1200 Camputer
ART Scope offers “Auto-Ranging” capabilities for ranges from 300 - 1200
meters. A shorter range setting (200m) is also provided. This scope allows
the shooter to adjust the scope for long range, and still have all the
internal adjustment for initial zero and fine adjustment. Zoom power is
6x to 24x with a 50mm and the reticle is a “No-Math” Mil Dot configuration.
All air to glass surfaces are fully multi-coated to give a brilliant high
resolution image, and adjustments are covered tactical type with 1/8 minute
clicks. Leatherwood Camputer Scopes include both rings and an integral
clamp-on flat-top mounting system.
The Leatherwood ART M-1200
Camputer sniper scope includes both scope rings, an integral clamp-on flat-top
mounting system and flip-up recticle covers.
Technical Information
Tube Diameter: 1"
Objective Bell Diameter:
63mm
Ocular Bell Diameter:
40mm
Adjustment Click Value:
1/8"
Eye Relief: 3.75-3
Exit Pupil Diameter:
Not listed by manufacturer
Field of View at 100 Yards:
Not listed by manufacturer
Dimensions, in inches
unless otherwise stated:
-
A: 15.47
-
B: Not listed by manufacturer
-
C: Not listed by manufacturer
-
D: Not listed by manufacturer
-
E: Not listed by manufacturer
-
F: Not listed by manufacturer
-
G: Not listed by manufacturer
-
H: Not listed by manufacturer
Weight: 32.5oz
Further Information
If you would like more information
on the Leatherwood M-1000/M-1200 ART Sniper Scopes or NetStar Technologies'
complete line of Leatherwood/Hi-Lux Optics scopes, mounting systems, and
accessories, contact NetStar Technologies Sales at (361) 354-5468. If you
are looking for instructional videos, click the links below.
Leatherwood
ART Sniper Scope Introduction
Leatherwood
ART M-1000 Sniper Scope How to Use Manual
NOTE:
ALL OUR CAMPUTER ART SCOPES REQUIRE EITHER A STANDARD WEAVER BASE OR PICATINNY
RAIL TO MOUNT ON.
